Supported Hardware
DDC is a market leader in high-reliability data bus networking solutions, including sub-systems, boards, components, and software for the defense, civil aerospace, and space markets.
- WiFi Throttles
In the device manager, he can see either unknown device or DCSD LED status. The drivers cannot be installed from the original software disc. I already changed the USB cable, managed to manually install the FTDI drivers and after installation the computer in the manager only shows USB Serial Port (COM3), nothing else can be done. This software addresses an issue where the Windows warning event ID49 was generated when a second VLAN setting was added on a teamed device. This software addresses an issue where link diagnostics failed on the NC375T PCI Express Quad Port Gigabit Server Adapter. Supported Devices and Features: This driver supports the following network adapters: HP NC107i PCIe Quad Port Gigabit Server Adapter; HP NC325m Quad Port PCIe Gigabit Server Adapter; HP Ethernet 1Gb 2-port 330i Adapter (182D) HP Ethernet 1Gb 2-port 330i Adapter (22BD) HP Ethernet 1Gb 4-port 331FLR Adapter; HP Ethernet 1Gb 4-port 331i Adapter (3372).
Applications
Tools
- Common Tools:
- Blocks:
- Routing and Control:
- Other:
Layout Automation
JMRI Help:
Contents/ Index
Glossary/ FAQ
JMRI supports a wide range of DCC 'command station'-style products from various model railroad automation vendors. We also support non-DCC layout accessories and devices that connect via a variety of networks and protocols. This page lists hardware and networks that JMRI is known to work with, and provides links to information on how to configure JMRI to work with each particular type.
- Hardware Supported:
- Additional Topics:
If there is a way to make a computer communicate with a given piece of model railroad equipment, it is possible to connect it to JMRI. If you don't see your particular system here, please ask about it on the JMRI users.
For developers adding new hardware integration: see here for information about Creating Help and Web Pages for New Hardware.
Category/Alphabetic Index
This index cross-references hardware and products by the categories under which they appear on this page. Click on a category to go to that category on this page. Click on a hardware item to go to the JMRI Help page for that product or family. The sidebar provides an alphabetic list.
Networks and Protocols:
- WiFi Throttles
Programmers:
Multi-purpose Hardware
Configure: See the JMRI arduino help page for information on configuring for accessory control. See also DCC++ for use as a DCC command station.
Configure: CTI Electronics boards via Acela adapter.
General information on connecting JMRI to a Digitrax LocoNet
Configure: Connections to a LocoNet via
- The older LocoBuffer-II, LocoBuffer and MS100 interfaces
Configure: LocoNet Simulator for use when disconnected from a layout.
Configure: Remote connection to a LocoNet via JMRI LocoNet Server.
Configure: Remote connection to a LocoNet via LbServer. More information on connecting multiple computers to a single LocoNet
Configure: Programming and testing decoders without a command station via a Digitrax PR2 interface, PR3 interface, or PR4 interface.
Configure: Directly connecting to an Intellibox.
Configure: Connecting to a Standalone LocoNet.
Configure: Connecting to a IPOCSMR system.
Configure: Lenz LI100, LI101F, LIUSB or GenLi XPressNet interfaces, ZTC Controls ZTC640 interface, or an XPA and Hayes compatible modem.
Please check the notes above for system specific restrictions on what JMRI can do.
General information on connecting JMRI to a SPROG programmer/command station
General information on connecting JMRI to a SPROG Generation 5 programmer/command station
Command Stations
Configure: Atlas Commander via Lenz LI100, LI101F, LIUSB or GenLi XPressNet interfaces, ZTC Controls ZTC640 interface, or an XPA and Hayes compatible modem
Note: you can not program decoders with this configuration.
Configure: EasyDCC command station via Serial or Terminal Server
Configure: DCC++ Open Source Arduino Command Station.
Configure: DR5000
General information on connecting JMRI to a Digitrax LocoNet
Configure: Connections to a LocoNet via
- The older LocoBuffer-II, LocoBuffer and MS100 interfaces
Configure: LocoNet Simulator for use when disconnected from a layout.
Configure: Remote connection to a LocoNet via JMRI LocoNet Server.
Configure: Remote connection to a LocoNet via LbServer. More information on connecting multiple computers to a single LocoNet
Configure: Programming and testing decoders without a command station via a Digitrax PR2 interface, PR3 interface, or PR4 interface.
Configure: Directly connecting to an Intellibox.
Configure: Connecting to a Standalone LocoNet.
Configure connection to ECoS command station.
Configure: Twin Centre communications (LocoNet)
Configure: Fleischmann Z21 and z21 via Ethernet.
Drivers Tams Elektronik Port Devices Online
Configure: Hornby Elite via built in USB Port
Configure: Hornby Elite or Hornby Select via Lenz LI100, LI101F, LIUSB or GenLi XPressNet interfaces, ZTC Controls ZTC640 interface, or an XPA and Hayes compatible modem.
Please check the notes above for system specific restrictions on what JMRI can do.
Connection: Serial cable
Configure: TMCC Command Base
Configure connection to CS2 Command Station 2.
CS Command Station - see ESU ECoSMRC decoders can be configured via DecoderPro using any supported DCC system.
For more information on connecting JMRI to the MRC command station, see the MRC system page.
Configure connection to a Powerhouse Pro via serial link or Terminal Server.
Configure connection to a PowerCab via NCE USB adapter.
Configure: Roco LocoMaus 2 (Roco Part number 10760), Roco MultiMaus (Roco Part number 10810), or Roco multiZENTRAL-Pro (Roco Part number 10830) via Lenz LI100, LI101F, LIUSB or GenLi XPressNet interfaces, ZTC Controls ZTC640 interface, or an XPA and Hayes compatible modem.
Please check the notes above for system specific restrictions on what JMRI can do.
Configure: Roco Z21 and z21 via Ethernet.
Configure: SPROG as either a stand-alone DCC programmer or DCC command station
Configure: SPROG Generation 5 as a DCC command station and programmer
Configure connection to TAMS Master Control command station.
Configure: Uhlenbrock Intellibox-I or -II via LocoNet interface
Configure: Uhlenbrock Intellibox-I via built-in serial port
Configure: Uhlenbrock Intellibox-II via built-in USB connection
Configure: Viessmann Commander via Lenz LI100, LI101F, LIUSB or GenLi XPressNet interfaces, ZTC Controls ZTC640 interface, or an XPA and Hayes compatible modem.
Please check the notes above for system specific restrictions on what JMRI can do.
Connection: Wangrow Serial Port
Configure: System One
Configure: ZIMO MX-1
Configure: ZTC Controls ZTC511, ZTC Controls ZTC521 via Lenz LI100, LI101F, LIUSB or GenLi XPressNet interfaces, ZTC Controls ZTC640 interface, or an XPA and Hayes compatible modem (requires XPressNet V3.0 software).
Please check the notes above for system specific restrictions on what JMRI can and cannot do.
Networks and Protocols
Configure: Bruce Chubb's C/MRI control system for a connection via direct serial, USB-serial adapter, or network connection.
General information on connecting to a Digi XBee network
Configure: Used for IPOCSMR.
General information on connecting JMRI to a Digitrax LocoNet
Configure: Connections to a LocoNet via
- The older LocoBuffer-II, LocoBuffer and MS100 interfaces
Configure: LocoNet Simulator for use when disconnected from a layout.
Configure: Remote connection to a LocoNet via JMRI LocoNet Server.
Configure: Remote connection to a LocoNet via LbServer. More information on connecting multiple computers to a single LocoNet
Configure: Programming and testing decoders without a command station via a Digitrax PR2 interface, PR3 interface, or PR4 interface.
Configure: Directly connecting to an Intellibox.
Configure: Connecting to a Standalone LocoNet.
Configure: CBUS networks
Configure: Modbus networks
Configure: MQTT networks
Configure connection to an RPS (Railroad Position System) position detection system.
Configure: OpenLCB networks
Configure: Connection to SRCP server
Connection: X10, Insteon power-line controllers
Configure: CM11, 2412S and compatible controllers.
Programmers
General information on connecting JMRI to a Digitrax LocoNet
Configure: Programming and testing decoders without a command station via a Digitrax PR2 interface, PR3 interface, or PR4 interface.
Connection: Quantum Programmer
Configure: USB connection
QSI decoders can be programmed with DecoderPro through any DCC system. JMRI can't load sounds into QSI decoders.
Configure: SPROG as either a stand-alone DCC programmer or DCC command station
Configure: SPROG as DCC command station and programmer
Accessories and Other Devices
Configure: See the JMRI arduino help page for information on configuring for accessory control. See also DCC++ for use as a DCC command station.
Configure: Bachrus MTS-DCC Model Train Speedometer
Configure: DCC4PC detection boards
Configure: Hare, Wabbit, Block Watcher or PSX family products.
Maple Systems touch panel
Configure: connection via serial link
Configure connection to Oak Tree's Railroad Control Interface (RCI), including the IO-24, IO-48 and O-48 interface cards and HH-2 handheld throttle.
(Note: RCI is to be replaced by Layout Control System (LCS))
Configure: RailDriver cab simulator
Configure: Grapevine nodes
Configure: TracTronics SECSI connections
Hardware Manufacturer Index
This section cross-references hardware manufacturers and products that are known to work with JMRI. See above for links to specific help pages.
[TBA]
Connecting to Command Stations
- Macintosh
- PC
- Terminal Server
- Raspberry Pi
General hardware info
If your layout uses some feedback mechanism to sense the actual positions of Turnouts, for example a microswitch connected to the throw bars or a decoder that returns a confirmation message, JMRI can use that to keep track of what's actually happening on the layout. We call this 'Feedback', and how to configure and use it is described on the Turnout Feedback page.
A way to use a PDA to access JMRI.
CBUS® is a registered trade mark of Dr Michael Bolton
-->The IP Phones certification program ensures that customers using certified desk phones and conference phones will experience high quality audio calls and meetings experience.
Announcing Certified for Microsoft Teams
In addition to offering customers a range of Skype for Business certified IP phones, as part of the Teams IP phone certification program, we are announcing the availability of new IP phone hardware that will be certified for Microsoft Teams. This certification program ensures a higher quality bar with higher performance targets and audio quality metrics. Phone vendors are actively working to meet this higher bar and will be qualifying against the new requirements this calendar year. Some of our partners are also working to provide support for the Skype for Business service on the same hardware as the Teams IP phones. Benefits from the Teams certified IP phone include:
- Native Teams experience with hardware button integration and LED notifications
- Calendar integration and one-touch meeting join
- Deployed and managed via the Microsoft Device Management Solution with Intune integration
Currently certified IP Phones
The following phones are Certified for Microsoft Teams:
| Phone model | Firmware version | Release date |
|---|---|---|
| Audiocodes C450HD | C450HD_TEAMS_0.225 | March 2019 |
| Audiocodes C448HD (CAP mode only) | C450HD_TEAMS_0.225 | March 2019 |
| Crestron UC-2 | 1.0.1.46 | July 2020 |
| Crestron M100 | This product has been discontinued. For more information, visit Crestron M100 on Crestron's website. | Discontinued as of 5/11/2020 |
| Crestron Flex UC-P100-T & UC-P110-T | This product has been discontinued. For more information, visit UC Phone on Crestron's website. | Discontinued as of 5/11/2020 |
| Lenovo ThinkSmart View | CD-18781Y.200410.067 | April 2020 |
| Poly Trio C60 | 5.9.3.6155 | April 2020 |
| Poly CCX400 | 1.0.0.0200 | January 2020 |
| Poly CCX600 | 5.9.12.1122 | January 2020 |
| Poly CCX500 | 5.9.12.1122 | December 2019 |
| Poly Trio 8500/8800 (shared mode only) | 5.9.0.10869 | June 2019 |
| Yealink MP58 | 122.15.0.27 | December 2020 |
| Yealink MP54 | 122.15.0.27 | November 2020 |
| Yealink MP56 | 122.15.0.6 | March 2020 |
| Yealink VP59 | 91.15.0.16 | June 2019 |
| Yealink T55 | 58.15.0.36 | May 2019 |
| Yealink CP 960 | 73.15.0.20 | December 2018 |
| Yealink T58 & T56 series | 58.15.0.20 | December 2018 |
Drivers Tams Elektronik Port Devices Download
Currently certified Collaboration Bars
The following Collaboration Bars are Certified for Microsoft Teams:
| Collaboration Bar model | Firmware version | Release date | Room size (up to) |
|---|---|---|---|
| Yealink MeetingBar A20 | 133.15.0.19 | November 2020 | Focus room(3m x 3m) Small meeting room(4.5m x 4.5m) |
| Poly Studio X30 | 3.1.1.216109 | June 2020 | Focus room(3m x 3m) Small meeting room(4.5m x 4.5m) |
| Poly Studio X50 | 3.1.1.216109 | June 2020 | Focus room(3m x 3m) Small meeting room(4.5m x 4.5m) |
| Yealink VC210 | 118.15.0.14 | February 2020 | Focus room(3m x 3m) Small meeting room(4.5m x 4.5m) |
Currently certified Teams display
The following Teams displays are Certified for Microsoft Teams:
| Teams display model | Firmware version | Release date |
|---|---|---|
| Lenovo ThinkSmart View | CD-18781Y.201006.099 | October 2020 |
Product release information for Teams Phones
The following are the latest Teams IP phone app and firmware versions.
App versions
| Product release | Release date | Microsoft Teams app version | Company Portal version | Admin Agent version |
|---|---|---|---|---|
| Update #7 | December 8, 2020 | 1449/1.0.94.2020111101 | 5.0.4927.0 | 1.0.0.202010121132.product (.223) |
| Update #6 | October 12, 2020 | 1449/1.0.94.2020091801 | 5.0.4912.0 | 1.0.0.202006290446.product(216) |
| Update #5 | August 31, 2020 | 1449/1.0.94.2020071702 | 5.0.4867.0 | 1.0.0.202006290446.product(216) |
| Update #4 | June 30, 2020 | 1449/1.0.94.2020051601 | 5.0.4771.0 | 1.0.0.202005060552 |
| Update #3 | May 13, 2020 | 1449/1.0.94.2020040801 | 5.0.4715.0 | 1.210 |
Firmware versions
When you install a new firmware version on your device, you can determine the corresponding Microsoft Teams app, Company Portal, and Admin Agent, versions that are installed by finding the product release in the Included product release column. Then look up the product release in the App versions table above.
| Device model | Firmware version | Year/Included product release |
|---|---|---|
| AudioCodes C448HD | C450HD_TEAMS_1.8.288 | 2020 Update #7 |
| AudioCodes C450HD | C450HD_TEAMS_1.8.288 | 2020 Update #7 |
| Lenovo ThinkSmart View | CD-18781Y.200922.098 | 2020 Update #6 |
| Poly CCX400 | 6.2.23.0202 | 2020 Update #7 |
| Poly CCX500/CCX600 | 6.2.23.0202 | 2020 Update #7 |
| Poly Trio C60 | 6.2.23.0202 | 2020 Update #7 |
| Yealink T55/T56/T58 | 58.15.0.118 | 2020 Update #7 |
| Yealink MP56 | 122.15.0.27 | 2020 Update #7 |
| Yealink VP59 | 91.15.0.50 | 2020 Update #7 |
| Yealink CP960 | 73.15.0.111 | 2020 Update #7 |
Product release information for Collaboration Bars
The following are the latest Teams Collaboration Bar app and firmware versions.
App versions
| Product release | Release date | Microsoft Teams app version | Company Portal version | Admin Agent version |
|---|---|---|---|---|
| Update #3 | November 24, 2020 | 1449/1.0.94.2020102101 | 5.0.4927.0 | 1.0.0.202006290446.product versioncode: 216 |
| Update #2 | August 24, 2020 | 1449/1.0.94.2020062501 | 5.0.4771.0 | 1.0.0.202005060552.product versioncode: 212 |
| Update #1 | May 13, 2020 | .040901 | .4715 | .210 |
Firmware versions
When you install a new firmware version on your device, you can determine the corresponding Microsoft Teams app, Company Portal, and Admin Agent, versions that are installed by finding the product release in the Included product release column. Then look up the product release in the App versions table above.
| Device model | Firmware version | Year/ Included product release |
|---|---|---|
| Yealink VC210 + CP900 | 118.15.0.42 | 2020, Update #3 |
| Poly Studio X30 | 3.2.3.280012 | 2020, Update #3 |
| Poly Studio X50 | 3.2.3.280012 | 2020, Update #3 |
Product release information for Teams display
The following are the latest Teams display app and firmware versions.
App versions
Drivers Tams Elektronik Port Devices Inc
| Product release | Release date | Microsoft Teams app version | Company Portal version | Admin Agent version |
|---|---|---|---|---|
| Update #1 | October 22, 2020 | 1449/1.0.95.2020092307 | 5.0.4927.0 | 1.0.0.202006290446.product |
Firmware versions
When you install a new firmware version on your device, you can determine the corresponding Microsoft Teams app, Company Portal, and Admin Agent, versions that are installed by finding the product release in the Included product release column. Then look up the product release in the App versions table above.
| Device model | Firmware version | Year/ Included product release |
|---|---|---|
| Lenovo ThinkSmart View | CD-18781Y.201006.099 | 2020, Update #1 |
See Microsoft Teams phones feature set for information on features supported by these devices.
Drivers Tams Elektronik Port Devices Gigabit
See Finding the Firmware version on a mobile device to determine the device firmware version on your mobile device.
Microsoft Teams licenses can be purchased as part of their Microsoft 365 or Office 365 subscriptions. To learn more about the required licenses for using Microsoft Teams on phones, see available phone system licenses.
For more information about getting Teams, check out How do I get access to Microsoft Teams?
If you are a vendor seeking to join the certification program, see How to Join for requirements and available programs.
Additional resources
Learn about Skype for Business and Microsoft Teams certification programs.