• Highpoint Hard Disk Controller Driver Download For Windows 10 64-bit
• Highpoint Hard Disk Controller Driver Download For Windows 10 32-bit

Ashwani Tiwari | Modified: November 9th, 2020 | Windows Error

By default Windows 10 will power down hard drives after 20 minutes of inactivity (or if the computer is a laptop, 10 minutes when on battery). For solid state drives (SSD) this has no affect, but for traditional mechanical hard drives, when this happens the hard drive will ‘spin down’ – reducing its power usage and giving the drive an opportunity to cool down. For Windows 10 and Windows 8 you will need to download the Legacy IEEE 1394 Firewire driver from below in the section marked The Fix for Windows 10 and Windows 8. Here we will show you step by step instructions, along with screen shots on downloading, installing and setting up the Firewire Drives.

“I have a desktop that I added PCI based raid controller card as well. The BIOS displays the card and I was able to configure Raid 1 without any issue. But when I try to install Windows I got an error message “Windows cannot be installed to disk. This system hardware may not support booting to a disk. Ensure the disk controller is enabled in the computer’s BIOS Menu.”

So, could you please help me to fix the issue of how to enable the disk controller in the computer bios menu? Your help would be greatly appreciated.”

Are you still facing the same issue? Not able to understand what to do and how to enable the disk controller in the BIOS menu? Do not worry, you are landed on the right page. In this blog, we will discuss different ways to enable the disk’s controller in BIOS menu.

Expert Suggestion:
In case of data loss, try out this utility:

Manual Way to Enable Disk Controller in BIOS

There are multiple ways to enable AHCI mode for SATA on PC where Windows is already installed, and Windows that normally run after this operation. Please have a look on steps to solve your query on how to enable disk controller in bios menu windows 10:

• First of all, run the Registry Editor
• For this, press Windows + R and type regedit in the command line box
• Go to this section HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Services iaStorV
• Double-click on Start icon and set its value to zero (0)
• In the upcoming section, HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Services iaStorAV StartOverride set zero value for element 0
• In this section, HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Services storahci set some values to zero for Start element.
• In the next subsection, HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Services storahci StartOverride set zero value for element 0.
• In this case, there is nothing to be seen, but you can see, if AHCI may not be enabled yet.
• Close the Registry Editor
• Restart the system and go to BIOS or UEFI. For the first time after a restart, it is always better to boot Windows in safe mode
• In BIOS or UEFI, find SATA settings to choose the particular mode for memory devices. Switch all of them to AHCI, save settings and restart the PC
• After restarting, Windows can start the installation of SATA drivers, and when it gets over, it will ask for another restart. To do so, users will enable the AHCI mode in Windows. (If the above method does not work properly, here is another solution. To initiate with, if users have problems with booting Windows in AHCI mode, return to IDE and restart the desktop, After doing this:)

• Start the Command promptas an Administrator
• Type “bcdedit /set {current} safeboot minimal” in the command prompt and press Enter key
• After getting a message that the operation successfully completed, restart the computer system
• Before booting the system, enable the disk controller in BIOS or UEFI using the above method and save the settings
• The PC will only boot up in safe mode and install all required drivers.
• Again, launch Command prompt as Administrator and type in bcdedit /deletevalue {current} safeboot
• Once the command is executed, restart the PC again. This time, Windows needs to boot with AHCI enabled and without any restrictions.

Well, these instructions can theoretically result in unintended consequences like the inability to start the operating system. Moreover, this method requires technical skills and knowledge to accomplish the task. Here you have got the solution for your query How do I enable disk’s controller in the BIOS menu?

Data Loss Solution!!

There might be an instance, wherein the drive gets corrupt or format while enabling the disk controller in BIOS. Therefore, to resolve all such issues, one can use Computer Data Recovery Software. It is a simple and reliable solution, which helps to recover all deleted files from the HDD. It is not the solution for your main concern on how to enable disk controller in the computer bios menu Windows 10, 8, 7 and brands Asus, Acer, Sony Vaio, Dell, Samsung etc.

Time to Conclude

At certain times, some users fail to enable disk controller in BIOS. This situation occurs due to several reasons. Therefore, in this blog, we have discussed a manual procedure to enable the disk’s controller in the BIOS menu. Else, users can opt for a reliable third-party tool, listed above. Mainly focused on steps to enable disk controller in bios menu Sony Vaio, Asus, Acer, Dell, Samsung in Windows 10, 8, 7 etc.

Errors: No Drives Were Found. Click Load Driver to Provide a Mass Storage Driver for Installation

During the process of installing Windows OS on a specified HDD or SSD, you may surprisingly find that the hard disk is not detected during the Windows installation, with either of the following error messages coming along.

'We couldn't find any drives. To get a storage driver, click Load driver.' 'No drives were found. Click Load Driver to provide a mass storage driver for installation.'

However, clicking 'Load Driver' doesn't solve the problem at all. What's the next move then? Have you found viable solutions to troubleshoot hard disk not detected in Windows 10 or Windows 7 installation even it's normally connected to the computer?

How to Fix Hard Disk Not Detected in Windows 10 Installation

Even though Windows 10 or Windows 7 installations include almost all disk drivers, the 'No drives were found. Click load driver to provide a mass storage driver for installation' issue occurs from time to time and you find no way to out. When you encounter Windows 10 install not detecting hard drive or Windows 7 couldn’t find any drivers to get storage driver problems, try the practical six ways below.

Method 1. Use a Different SATA Port

If you are using a desktop computer, try using a different SATA port and see if that helps at all. Sometimes they come with two different controllers.

Method 2. Load RAID Driver for RAID Disk

Windows 10 install not detecting hard drive mostly occurs on RAID disk. In this case, you need to load RAID drivers manually to fix the issue.

Step 1. On the Windows Setup windows, you will see Where do you want to install Windows? And there is no hard drive detected. Click 'Load Drivers' at the bottom left of the screen, then click 'Browse' to choose the device driver.

Step 2. Go to your computer or storage device to find and load an available RAID driver.

Step 3. After the device diver has been loaded, Windows 10 installing will successfully detect the hard disk. Then, follow the onscreen instructions to install Windows.

Method 3. Check the Hard Drive in BIOS

Otherwise, take some time to check if hard drive shows up in BIOS, especially you're installing an operating system from a bootable USB or CD/DVD disc.

By holding and pressing F2, you'll enter BIOS settings. See if the hard drive showing up there. Click solution to repair hard drive not showing in BIOS.

If not, check your BIOS settings for the following parameters:
* SATA configuration -> Enhanced
* Configure SATA -> AHCI

Method 4. Check the Status of Your Hard Drive

Step 1. Press Windows + R and the window will pop up.

Step 2. Input devmgmt.msc and press Enter.

Step 3. Choose Disk Drives and right-click the hard drive.

Step 4. Click Properties and check the status of your hard drive. If it is Ok, showing 'This device is working properly'.

Method 5. Boot from Windows 10 Install Media

Highpoint Hard Disk Controller Driver Download For Windows 10 64-bit

Microsoft also provides a method about boot from the Window 10 Install Media. You can take these steps to fix the issues 'drive not showing up when Windows 10 install'.

Step 1. Choose Install Now > Accept License Agreement > Choose the installation type and click 'Custom Advanced'.

Step 2. Press Shift + F10.

Input each command and press Enter: DISKPART > list volume > select disk* > clean > convert mbr > create partition primary > active > format quick fs=ntfs >exit

Then you can install Windows again.

Method 6. Ask Help from the Manufacturer

Since the manner of installing or reinstalling Windows OS happens so frequently that most personal PC or desktop manufacturers have built-in checking tools for quick troubleshooting and repair. For example, Dell Online Diagnostic Tool, Lenovo Diagnostic Software for Hard Drive Quick Test, etc. So if you're their customers, feel no hesitate to ask help from the manufacturer and learn how to use tools to fix hard drive not detected issues alright.

Bonus Tip: Free Partition Master to Enhance System Performance

You can enjoy the exciting features of the latest system after successful Windows 10 installing. Furthermore, to enhance system performance and let software and hardware cooperate to achieve an optimal operating state, it’s necessary for you to have free partition management software, which enables you to organize and optimize your hard drive to extend your computer's life and capableness.

EaseUS Partition Master Free is a versatile partition management program that provides one-stop partition and disk management solutions, for instances:

• Resize/move partitions by sliding the partition left and right or enter the exact partition size you want, such as increase C drive to speed up your computer (move space from D drive to C drive supported by paid version)
• Create, format, delete, copy, and merge partitions
• Clone an entire disk to another even the destination partition is smaller than the source
• Convert file system from FAT32 to NTFS, convert MBR to GPT, convert dynamic disk to basic disk and vice versa, and so on
• Completely wipe out all the data on hard disk permanently

Now, download this ultimate Windows 10/8/7 disk management tool and follow the simple steps below to resize and move your partitions.

Step 1. Launch EaseUS Partition Master on your PC.

Step 2. Free up space to extend partition.

If the hard drive has enough unallocated space to extend the target partition, jump to Step 3, and continue. If not, free up space first:

• Right-click on a partition next to the target partition and select 'Resize/Move'.
• Drag the partition ends to free up space, leaving enough unallocated space behind the target partition, click 'OK'.

Step 3. Extend partition.

• Right-click on the target partition and select 'Resize/Move'.

• Drag the target partition handle into the unallocated space to extend partition.

Step 4. Keep all changes.

• Click the 'Execute Operation' button and click 'Apply' to keep all changes.

Windows 10 Install Not Detecting Hard Drive FAQs

1. How do I fix no device drivers found?

Fixes for No Device Drivers Were Found:

Solution 1. Switch to a USB 2.0 Port

Solution 2. Set the partition where you want to install Windows to as Activeewe

Solution 3. Create a New Disc

Solution 4. Enable the xHCI hand-off Option in BIOS

Solution 5. Change everything to legacy and set the boot device to your DVD or USB

2. Where do you want to install Windows 10 no drives were found?

To fix 'No drives were found. Click load driver to provide a mass storage driver for installation', do it in the following way:

Step 1. Click 'Load Drivers' at the bottom left of the screen, then click 'Browse' to choose the device driver.

Step 2. Choose and load an available RAID driver.

Step 3. After Windows 10 installing successfully detects the hard disk, follow the onscreen instructions to install Windows.

3. Where do you want to install Windows 7 no drives were found?

Fix: No Hard Drives Found in Windows 7 Installer:

Solution 1. Format the hard drive using diskpart in command prompt.

Solution 2. Load the hard drive storage controller drivers from a USB into the Windows setup.

Solution 3. Change the boot controller mode in BIOS.

Solution 4. Reset BIOS.

Solution 5. Use a different SATA port.

Highpoint Hard Disk Controller Driver Download For Windows 10 32-bit

4. How do I install drivers for my hard drive?

The basic steps to install drivers for a hard drive are:

Step 1. Configure the drive as a master or slave device (PATA only).

Step 2. Mount the drive in the chassis.

Step 3. Connect the data cable to the drive and to the PATA or SATA interface.

Step 4. Connect a power cable to the drive.

Step 5. Restart the system and run the BIOS Setup.

Step 6. If you are also installing a PATA or SATA interface card or RAID adapter, configure that card per the maker's instructions and attach the cables to it.